Take the bike out of the stand and give it a bounce on the ground to ensure everything is seated into place. To make sure the headset is correctly tighten squeeze the front brake and rock the bike back and forth.
eBay
Good pre-owned condition. Has a faint spot/mark at the hood.
eBay
Little Giant Bee Escape Porter Style One-Way Hive Valve.
eBay
eBay
Naturally every bike is different so there can be slight differences. Start by installing the bike into a workshop stand and prepare the tools required. You will need Allan keys, Paper towel, Degreaser and grease 9. Take the new bearings, apply a little grease and place on the crown race of the fork. The bearings have a chamfer on both side, the side it the chamfer on the outside is the side that fits into the frame or the headset cup 13. Return the top cap and tighten the bolt until it takes up the slack. Its really easy to over tighten this bolt so ensure you give it minimal force or you can damage the bearings. If the bars feel stiff to turn you have over done it. 14. Take the bike out of the stand and give it a bounce on the ground to ensure everything is seated into place. To make su.
eBay
eBay
Natürlich ist jedes Fahrrad anders, daher kann es zu leichten Unterschieden kommen. Beginnen Sie damit, das Fahrrad in einen Werkstattständer zu montieren und bereiten Sie die erforderlichen Werkzeuge vor. Sie benötigen Inbusschlüssel, Papiertuch, Entfetter und Fett 13. Bringen Sie die obere Kappe wieder an und ziehen Sie die Schraube fest, bis sie das Spiel aufnimmt. Es ist wirklich leicht, diese Schraube zu fest anzuziehen. Achten Sie daher darauf, dass Sie nur minimale Kraft anwenden, da sonst die Lager beschädigt werden können. Wenn sich die Stangen beim Drehen steif anfühlen, haben Sie es übertrieben. 14. Nehmen Sie das Fahrrad aus dem Ständer und lassen Sie es auf dem Boden hüpfen, um sicherzustellen, dass alles fest sitzt. Um sicherzustellen, dass der Steuersatz richtig festgezogen.
eBay
9. Prendere i nuovi cuscinetti, applicare un po' di grasso e posizionarli sulla corona della forcella. I cuscinetti hanno uno smusso su entrambi i lati, il lato con lo smusso esterno è il lato che si inserisce nel telaio o nella calotta della serie sterzo 13. Riposizionare il tappo superiore e serrare il bullone finché non recupera il gioco. È davvero facile stringere eccessivamente questo bullone, quindi assicurati di applicargli una forza minima altrimenti potresti danneggiare i cuscinetti. Se le barre sembrano rigide nel girare, l'hai fatto. 14. Togli la bici dal cavalletto e falla rimbalzare a terra per assicurarti che tutto sia al suo posto. Per assicurarti che la serie sterzo sia serrata correttamente, premi il freno anteriore e fai oscillare la bici avanti e indietro. Se senti colp.
eBay